Enterasys RoamAbout 3000 Betriebsanweisung PDF herunterladen (Seite 105)

Create Your DAPs

RoamAbout Switch Manager User’s Guide 4-5

AnAP’sfingerprintisthehashvalueoftheAP’spublicencryptionkey.Thefingerprintis

displayedonalabelonthebackoftheAP,andislabeledRSA key.IftheAPisalreadyinstalled

andoperating,usetheCLIcommandshowdapstatuscommandtodisplaythefingerprint.

6. Click

Next.

7. SelecttheAPmodelfromtheAPModellist.

8. Toselecttheradiotypeforasingle‐radiomodel,clicktheAPRadioTypeboxandselectthe

radiotypes:

• 11a—802.11a

• 11b—802.11bonly

• 11g—802.11b/g

9. ClickNext.

10. Configuretheradios:

a. Toenabletheradio,selectEnabled.

b. IntheChannelNumber

list,selectthechannelnumberfortheradio.

c. IntheTransmitPowerbox,specifythetransmitpowerfortheradio.

d. IftheAPhastworadios,clickNextandgobacktostep 10 .Otherwise,gotostep 11.

11. ClickFinish.

Note: The fingerprint is used for secure communication between the RoamAbout Switch and

the AP, and applies only to Distributed APs.

Notes: If RF Auto-Tuning for channel configuration is enabled, setting this value has no effect.

The channel number is controlled by RF Auto-Tuning.

Notes: If RF Auto-Tuning for power configuration is enabled, setting this value has no effect.

The power level is controlled by RF Auto-Tuning.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 213 214

Keine Kommentare

Enterasys RoamAbout 3000 Betriebsanweisung Seite 105