Enterasys 802.1Q Bedienungsanleitung PDF herunterladen (Seite 4)

Creating and Naming Static VLANs

14-4 802.1Q VLAN Commands

show vlan

ThiscommanddisplaysexistingVLANs.

Syntax

show vlan [static] [vlan-list]

Parameters

Defaults

•Ifstaticisnotspecified,informationforstaticanddynamicVLANswillbedisplayed.

•Ifvlan‐listisnotspecified,informationforallVLANswillbedisplayed.

Mode

Switchcommand,read‐only.

Example

Thefollowingexampleshowstheoutputofthiscommand.

matrix-x(switch-su)-> show vlan static

VLAN: 1 NAME: DEFAULT VLAN Status: Enabled

VLAN Type: Permanent FID: 1

Creation Time: 0 days 1 hours 58 minutes 58 seconds ago

Egress Ports

None.

Forbidden Egress Ports

None.

Untagged Ports

None.

static (Optional)DisplaysinformationrelatedtostaticVLANs.StaticVLANsare

manuallycreatedusingthesetvlancreatecommandorSNMPMIBs.The

defaultVLAN ,VLAN1,isalwaysstaticallyconfiguredandcan’tbe 

deleted.OnlyportsthatuseaspecifiedVLANastheirdefaultVLAN

(PVID)willbedisplayed.

vlan‐list

(Optional)DisplaysinformationforaspecificVLANorrangeofVLANs.

1 2 3 4 5 6 7 8 9 ... 23 24

Keine Kommentare

Enterasys 802.1Q Bedienungsanleitung Seite 4