Enterasys 802.1Q Bedienungsanleitung PDF herunterladen (Seite 24)

Enabling/Disabling GVRP (GARP VLAN Registration Protocol)

14-24 802.1Q VLAN Commands

Mode

Switchcommand,read‐write.

Usage

Thesettingofthesetimersiscriticalandshouldonlybechangedby personnelfamiliarwiththe

802.1Qstandardsdocumentation,whichisnotsuppliedwiththisdevice.

Examples

ThefollowingexamplesetstheGARPjointimervalueto100centisecondsforallports:

matrix-x(switch-su)#set garp timer join 100 *.*.*

Thefollowingexamplesetstheleavetimervalueto300centisecondsforallports:

matrix-x(switch-su)#set garp timer leave 300 *.*.*

Thefollowingexamplesetstheleavealltimervalueto20000centisecondsforallports:

matrix-x(switch-su)#set garp timer leaveall 20000 *.*.*

clear garp timer

ThiscommandresetsGARPtimerstodefaultvalues.

Syntax

clear garp timer {[join] [leave] [leaveall]} port-string

Parameters

Defaults

Atleastoneoptionalparametermustbeentered.

Mode

Switchcommand,read‐write.

Example

ThefollowingexampleresetstheGARPleavetimerto60centisecondsonGigabitEthernetport3

inslot5:

matrix-x(switch-su)#clear garp timer leave ge.5.3

join (Optional)Resetsthejointimerto20centiseconds.

leave (Optional)Resetstheleavetimerto60centiseconds.

leaveall (Optional)Resetstheleavealltimerto1000centiseconds.

port‐string Specifiestheport(s)onwhichtoresetGARPtimer(s).

1 2 ... 19 20 21 22 23 24

Keine Kommentare

Enterasys 802.1Q Bedienungsanleitung Seite 24