Enterasys ANG-1100 Betriebsanweisung PDF herunterladen (Seite 34)

22 Aurorean Network Gateway-1100 User’s Guide

Chapter 3

Configuring the ANG-1100 with Aurorean Web Config

– Set the Secondary DNS IP address.

– Click Apply.

! Click the PPPoE assigned IP address radio button and perform

the following steps:

– Specify a Username supplied by your cable/DSL provider.

– Enter a Password.

– Type the password again in the Confirm field.

– Click Apply.

3 If you chose the Manual or PPPoE options, a window appears

detailing the reconfiguration changes and prompting you to reboot the

ANG-1100. Click Reboot Now.

After a few moments when an IP address has been received for the external

port, the Internet LED will turn on. If a static IP address was configured, the

Internet LED will shine immediately.

NOTE

If you press the Reset button after configuring your ANG-1100, you will

lose your entire configuration. Any settings you supplied must then be

re-entered. Do not use the Reset button unless you want the configuration

to return to factory defaults. Also, you may want to record your

configuration settings.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Keine Kommentare

Enterasys ANG-1100 Betriebsanweisung Seite 34