Enterasys 2E253-49R Betriebsanweisung PDF herunterladen (Seite 104)

General Configuration Screen

4-12 Device Configuration Menu Screens

4.2.7 Setting the Device Time

To set the device time, perform the following steps:

1. Use the arrow keys to highlight the Device Time field.

2. Enter the time in this 24-hour format: HH:MM:SS

3. Press ENTER to set the system clock to the time in the input field.

4.2.8 Entering a New Screen Refresh Time

The screen refresh time can be set from 3 to 99 seconds with a default of 3 seconds. To set a new

screen refresh time, perform the following steps:

1. Use the arrow keys to highlight the Screen Refresh Time field.

2. Enter a number from 3 to 99.

3. Press ENTER to set the refresh time to the time entered in the input field.

4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press

ENTER.

If the time entered is within the 3 to 99 seconds range, the message “SAVED OK” displays at the

top of the screen. If the entry is not valid, Local Management does not alter the current setting, but

it does refresh the Screen Refresh Time field with the previous value.

4.2.9 Setting the Screen Lockout Time

The screen lockout time can be set from 1 to 30 minutes with a default of 15 minutes. To set a new

lockout time, perform the following steps:

1. Use the arrow keys to highlight the Screen Lockout Time field.

2. Enter a number from 1 to 30.

3. Press ENTER to set the lockout time in the input field.

4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press

ENTER.

NOTE: When entering the time in the system time field, separators between hours,

minutes, and seconds are not needed as long as each entry uses two numeric

characters. For example, to set the time to 6:45 P.M., type “184500” in the Device Time

field.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 389 390

Keine Kommentare

Enterasys 2E253-49R Betriebsanweisung Seite 104